At the same time, there are many kinds of wax. We also know that wax is also a good lubricant product. As we know above, silicone oil is easy to penetrate into the inner part of the wire, but wax as a solid can stay on the surface. Because it is a compound of silicon oil and wax. It was discovered in the 80s of last century that the products of silicon wax were superior to pure silicone oil. When ironing, oil will seep out and pollute other places. In addition, there are also problems in using, such as embroidery pattern embroidering a pattern, and the use of lines is very intensive. In addition, the amount of oil on the line is larger and the cleaning workload of the line is greater. First of all, there is no doubt that the cost is progressed. If the oil goes into the inner part of the line, where will the sewing thread have good lubrication? Therefore, before the emergence of silicon wax, the line manufacturers can ensure the lubrication performance of the line by improving the oil loading rate. In this case, the oil is easily penetrated into the inside of the thread after the sewing thread is oiled. We know that the structure of the sewing thread is fluffy. Why is silicone wax lubricant the best sewing thread lubricant? In principle, silicone wax can stay on the surface of sewing thread for a longer time. The domestic products are slightly less than those imported products. There are also 201 methyl silicone oil under the contact method. For example, the water emulsion of silicon wax under the impregnation method can be completely adsorbed on the sewing line, and at last only the water is retained, without pollution and easy to clean. Of course, the same products are different from different manufacturers. The performance of the products listed above ranges from low to high. There are three kinds of lube oil additives that can be selected under the contact method: silicone oil (line oil), 201 methyl silicone oil and (anhydrous) silicone wax emulsion. Under the impregnation method, the lubricating oil can be selected from the following two kinds:Ĭationic hydroxyl silicone oil emulsion (water emulsion) and silicon wax water emulsion. There are two kinds of oiling for sewing thread, one is impregnation and the other is contact method. For the time being, silicone lubricant is the best lubricant in the market. Choosing a good lubricant agent has a great influence on the lubricity of sewing thread. For sewing thread, it is a very important procedure to lubricate the sewing thread (oiling).
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |